This is the third gaming chair played by Corsair in the market. And it is for the first time that the manufacturer, instead of synthetic leather, uses cloth to provide maximum comfort. Let's look at the consequences of this decision.
Features and technical specifications of the gaming chair
While most sports seats bet on synthetic leather, Corsair You chose to use the fabric on your T3 RUSH. The fabric provides the highest comfort, especially when we sit on a chair with shorts or pants of some material (synthetic leather), and most of all, it gives us a great, very important persona at the hottest times.
T3 RUSH uses a phase 4 gas piston. This piston allows lifting the seat 10 cm and supports weight up to 120 kg. This Corsair gaming chair has a mechanism that allows the seat to be adjusted to 10 degrees, in addition to adjusting the height of the seat with a piston.
The base of the chair is plastic (nylon) held over 5 wheels, and of nylon, 6.5 cm in diameter. The seat is made of cold polyurethane foam and weighs in at 55 pounds per cubic meter. The back of the chair (also made of soft cloth) can be set either 90 degrees or 180 degrees.
The The power of this chair is 4D (They can be rotated up / down, left / right, front / back and then turned) and have dimensions of 26 cm x 10 cm x 2.65 cm.
The height of the seat is 44 cm, and can lift it to 54 cm. The arms are at a height of 28 cm (above the seat), and we can raise them to 36 cm. The height of the backrest is 85 cm. And the width of the backrest is 54 cm.
But weight, The Corsair T3 RUSH reaches 22,5 Kg, and has a 2-year warranty. And the important detail is that the fabric is resistant to burns.
Exclusion, commentary and first impressions of the Corsair T3 RUSH gaming chair
The seat Corsair T3 RUSH It comes in a sturdy cardboard box, very large and heavy (25 Kg). It is recommended to use it with the help of a second person to avoid damaging or damaging any parts of the chair.
In this box we will be able to see the picture of the chair in question, in addition to the model, color and other advanced features of it.
We open the chair, carefully (no one uses a cutter) to avoid damaging any part and we can see all the parts and all parts of the assembly that make up this seat. The first thing we would find would be 3 large pieces of chair, that is, a base, a chair and a backrest. Each of them comes fully packed and protected from bumps or possible defenses.
The base, as we have already explained, has a 5-star shape, everywhere we put each of the wheels of this seat. This base is completely plastic, and has some detail / plastic too) on the top of each leg.
The back of the seat is a carbon color, and completely covered with cloth. There are not many things unique in this backrest, except that it has two holes in the upper part, two cones in the lower back to better hold our back and the Corsair logo in the upper part. The finish is outstanding, and there is a zipper that allows us to go inside in case you have to install some foam.
The chair is carbon-colored and has two bombs on its sides to fit our small body. The arms are attached to this seat and all the cracks, both high and low, are very good. Good work by Corsair.
In addition to the previous 3 sections we will also find 2 boxes. Inside the first box we will find a seat machine, one of the most important parts of this type of accessories. This method is made of steel, is black, very heavy and has a lever that will allow us to adjust the height or block its balance.
Inside the second box we will find other resources for the seat. The first will be a blister where we will find two folding screws, two backrest trim screws, two rubber bands to cover holes and a key for all Hardware.
We'll also get seat towels, both those backrest and piston sides. And of course, the piston, which brings a more protective cap.
And finally, we will also get wheelchairs. These wheels are made of plastic (nylon), have no brakes and have 8 speaker.
Finally, we'll find two straps that we attach to this seat. The first is a cervix, which is made up of a simple foam that we can change when we want it with its zipper. This cushion has two straps that allow us to attach it to the top of the seat.
And the second of the march, the womb. This is a viscoelastic foam, it is excellent, and it allows us to dive in if you can change it. This cushion has no support, tied alone to the seat.
Assembly of the chair
Of course, this gaming chair includes a complete workshop guide, step by step, throughout the process until our chair is ready to start using.
The first thing to do is to put each of the wheels under the seat. We have to measure each wheel and its port and press it until it clicks. When we have 5 wheels mounted on the base, we can turn it and put some pressure on it to finish the fit.
The next step will be piston assembly. Just insert it into the hole (vertically) and remove the red cover to fix it. We will also put the piston olive.
The next step would be to install the machine on the base of the seat. To do this, the first thing we will do is remove the screws from the seat with the key inserted (all but those of the lamps) and place, as shown (with the "front" portion pointing to the front of the seat), its way. We tighten the screws in the X position until this path is inserted into the seat.
Next we have to attach the backrest to the base of the seat. We also remove the screws that fit behind the seat and match it to the seat. In this case it is best to switch to a second person, as it will be faster and easier to ride. Although only one person can do it.
Once the backrest is found, the next step will be to place the cut-off covers to cover the support brackets. We will also install a rubber cover to cover the screw hole.
We're already all together. What we have left is to join these two parts (especially the piston on the machine) and that's it. Once installed (we have to make sure it is properly mounted) we can take a seat and start to feel the comfort that Corsair has brought us.
Your vision of the Corsair T3 RUSH sports chair
Of course, Corsair would not bring a "single seat" to him, but he had the idea of bringing "a cushion that every user wants to have in his house." And, of course, you're successful.
From the very first moment we can be grateful to be facing the finest fabric chair made by Corsair, one of the most suitable manufacturers in the PC gaming market. This chair has no speakers, there are no RGB lights or any paraphernalia that, for better or worse, is becoming more common in this type of accessories.
The Corsair T3 RUSH Seat is focused on providing users with a comfortable, sturdy seat made of high-quality materials. From the Category 4 piston to the flame retractor fabric or the 4D arms, we are facing a comfortable, sturdy chair and, above all, a much cooler seat than any other leather seat.
There are certain aspects that can be improved. For example, we would like to see the base of the metal chair, or the high-speed wheels or other objects (such as the lock system). We also think that the cervix leaves a lot to be added by looking at the other parts of the seat.
As for the price, we will find cheaper and cheaper seats. But yes, because 280 euros, the official price on the Corsair website, we are undoubtedly facing a great seat with high quality / high value. If you want to refresh your seat and want some fabric and good quality, then go ahead.
In light of all this, we have decided to give the chair Corsair T3 RUSH our prize for Platinum In addition, we highlight in particular design and their relationship quality / price.