Great performance with very low noise and good temperatures, a permanent equation becomes impossible when we add a variable price to it. As we mentioned, there are no surprises here, there aren't even any great tactics to use at the price of zero, but we can provide some simple guidelines for how to improve the sound of the PCs.
PWM control via motherboard
All the fans we have on a PC, if this is current on average, should include either a pin with a PIN or PWM. As soon as our motherboard is just fine, it will allow intelligent RPM management with it UEFI / BIOS.
This is important, because a good profile that increases temperature fluctuations will save us a lot of noise, especially for lack. If, for example, our fans were supported by molex, then it would be best to choose to change them to improve their sound and control.
Enable energy saving methods
Most users always use the Windows calibration mode of their PCs, where the most demanding can choose high performance mode by dropping temperatures and noise.
But it's energy-saving mode or «economy»It's a small and widely used tool, but it has the long-term benefits of our quiet PC. Processor power greatly benefits this mode, reducing frequencies and volumes to maximum and long term.
This will allow us to have a low voice on our AIO or heatsink. Logically, there is a loss of functionality in certain situations, so we may have to enable or disable it according to our needs.
Manage graphics card followers
Though it may not sound like this, a graphics card means a good portion of PC audio, especially while we're playing. The software speed profile is ideal for our purpose, where such applications After being burned, GPU TweakII
For AMD GPUs this includes not only lower excitation, but also better temperature, because sometimes and especially in reference models, the temperature / RPM curve calculations are not optimal, so they may need to be monitored and manually configured.
Upgrade the chassis entry system
In air cooling, direct movement of the internal chassis air is required. Each PC is a planet, so the fixed rules do not generally apply in this section, but we must look at one thing that works for everything: it is not allowed to simply introduce "cold air" into the elements, but that it is necessary to remove the hot air they produce very quickly.
Are you cunning? It can, but now look at your PC, does it emit hot air at the same rate as it introduces cool air? Flow preparation is important and can either be improved at a lower cost or absent from fans, by altering the mobility of certain followers.
Usability here is important, and we can get more with less, because better temperatures in nutrients mean less noise in their heatsinks and fans.
Install installation panels
A less recommended option, useful, but more expensive as a general rule. Bituminious panels for sensing installation, or a limited building model or fixed generalists are a way to do their job, but they can be expensive.
In addition, a full-size chassis handicap and user's ability to mount it are added. If none of this is a problem and we have calculated all the measurements correctly, it is a great way to reduce the noise.
Table of Contents