Technical specification for EK Loop Connect
- Type: controller
- Dimensions: 126 (L) x 70 (W) x 18 (H) mm
- Power output
- They do not like: 20 W per channel
- RGB: 8 W per channel
- Ports
- Food: 1 x MOLEX 4 pins
- 6 x PWM 4 pins
- 6 x D-RGB 3 pins
- 3 x Temperature
- 1 x flowmeter
- 1 x index of cool rate
- 1 x USB 2.0
- 1 x 4 pins on Cascade
EK Loop Connect control features
He EK Loop Connect Control It's electronic where we will connect fans, pump, coolant sensors and several D-RGB LED straps (similar to the ARGB straps we all know). By using software related to this device, we can real-time view all the cool parameters of our system, and configure its lighting.
The device in question has something size contains, being 126 (L) x 70 (W) x 18 (H) mm. The fact is that we can attach it to our computer case using the same anchor screws we normally use to secure 2.5 inch storage units.
On the 4 sides of the EK Loop Connect Controller the manufacturer installed the series connectors, that we are set to control all the things we commented on a while ago. Therefore, there will be 6 PWM connectors where we can connect fans of our system (F1 to F6), 3 connectors for heat exchangers (T1 to T3) and 6 other connectors for controlling the lighting of -D-RGB of our components (L1 to L6) belongs to them, whether they are fans or LED strings.
The space is left for other items not yet included in the EK Waterblocks catalog, such as flow meter (FLO) and level meter within the refrigerant storage unit of your choice (LVL).
The to feed The control device is made with a 4-MOLEX connector, although the manufacturer also incorporates a two-way SATA connector adapter into the male MOLEX connector, as long as your power supply already has one. MOLEX connectors They tend to deliver.
On the other hand, the communication between the EK Loop Connect controller on the PC is done via an internal USB cable, which we have to connect to another USB 2.0 connectors on motherboard.
The EK controller can provide up to 20 W for each PWM connector
Another thing that distinguishes the EK Waterblocks controller from other models in the market is its ability to supply up to a point. 20 W of power
Although very rare, he uses one D-RGB connector we can get up to 8 W of use, yes we can connect more of them in parallel, if we use a splitter to separate each of them.
Special mention requires software required by this EK driver.
This software is designed to be used by quality users but, at the same time, it has been sought to be very easy to use for this type of users. In it, users will not have easy access to all of their dating program data. They can also edit the names of different sensors in the system.
Price and availability
The EK Loop Connect controller has already appeared available manufacturer's web site e price 55.82 euros.
Table of Contents