EK is already known by all as the finest liquid refrigeration manufacturers and is considered the premium brand within the industry. After the positive reception of the new X570 boards and especially the new processors Ryzen 3000, the product does not want to close out the year without ending the cycle.
So, he recently introduced his new Monoblock GIGABYTE performance similar to the AORUS X570 Elite, especially because it is one of the best-selling models because it is one of the full range boards for the AM4 platform replacement with the said chipset.
EK Quantum Momentum AORUS X570 Elite D-RGB: liquid cooling up to input range
It is important to pay attention to the high and medium range such as the introduction of the platform, where in the case of the AM4 it talks a lot about selling it because of its high price. This block is specific to the specified motherboard so it only comes with program compatibility RGB Fusion 2.0 SYNC product.
Its LED system is based on a new D-RGB or A-RGB, so we'll have 5V voltage with a standard 3-pin connector, logically Accessible LEDs.
This Monoblock uses the latest EK technology for this kind of thing, not an unintentional entry to the Quantum series. Customization requires a surprisingly modified jet system, where the central part of the transit system has grown, allowing greater flow of water through its profiles.
This channel is divided into two phases as soon as the water has cooled to a cold plate, as it will flow to the top of the block to cool the upper VRMs, while the other side will drop back to lift and finish cooling the rest of the VRM plate.
The most curious thing is undoubtedly the new cash flow, since it will now have one way out. This system, once all VRMs are gone and cooled down, allows only water to go somewhere, whereas in some blocks this would not be the case, since they have at least two modes.
Better internal flow to improve performance on powerless pumps
Not all users buy a D5 of 1500 L / H or DDC 3.25 per 1000 L / H, as they may not need it or may want to maximize the cost and noise they can extract. So there are other cheaper and more efficient alternatives.
The re-alignment of the block to the inside, according to EK, allows the flow to be better and this gives the user the option of adding DC-LT type pumps that may be more than adequate if the loop is well thought out and organized.
The base of the block as usual is made of nickel-plated electrically coated steel, while the top or cover is made of standard acrylic glass. This is new EK-Quantum Momentum AORUS X570 Elite D-RGB It is already sold in the EK store and will reach the top sellers in a few days at a price 139.90 euros.