Keep in mind one thing, and that is that inkjet ink cartridges are very expensive because each time you change the cartridge and turn the head print; So, if you decide to replenish the cartridges instead of buying new ones, you won't change heads so the printer will tend to fail, especially because the ink is dry on the heads.
Prerequisites
Logically the first thing you will need she is a star. You can buy it in stores such as industrial hardware stores or computer parts, but you also have it on Amazon without further ado.
In the event the tin cans you buy no longer come with it the applicant
You will also need to prepare for the work environment. Replenishing ink cartridges is complicated and certainly inks, so keep them useful kitchen paper, and it may be best to get you organized on a smooth table a piece of plastic you can leave.
How to Fill Ink Cartridges
The first thing to do is obviously remove the ink cartridges attached to the printer (and we recommend leaving them on the table and kitchen paper to avoid placement). The next step will depend on the cartridge manufacturer, as each has its own filler system, but usually this is information you can find online.
Usually, cartridges have a sticker on top. We should remove that adhesive (precisely because then you have to back it up) and we'll get two holes: one of them is to insert a needle syringe and the other to let the air escape, so that we don't create pressure inside the food box and put it all lost.
Time to fill the syringe with ink and carefully insert it into the cartridge. It would be great if you set the volume of the label box, so we can measure how often you insert the syringe.
Once we have filled the ink cartridge, we must clean the surface with kitchen paper and continue to close it by attaching the adhesive adhesive. To make sure the cartridge is closed properly, it may be best to place it with a little enthusiasm, thus making sure it blends well. In fact, the adhesive will no longer adhere properly, in that case it is recommended to place one or two additional layers of heat.
Now, we have to repeat the process with all the boxes we will fill. It is a very simple process and it does not matter if you are cared for, but it is tricky when you make a mistake. With a little practice, it will not take more than a few minutes to complete each cartridge.