Or Intel Burn Test Some years to its credit and stop updating not too long ago, they are the most sought-after software that is currently under pressure, perhaps among other software like Realbench and Prime 95.
Intel Burn test: monitor your CPU temperature
This test is very easy to set up as demand and will take our CPU beyond traditional software limits. So, to make it pass, a power point is usually required compared to standard compression software, but at the same time it guarantees the processor's stability.
The benefit of using this program over previous versions of Prime 95 is usage Linpack, because it is very clear and that's why it compresses the CPU so much. In addition, it requires less compression time to detect the instability, because it uses Intel's own operating system, which is a reasonable company to use to test its tests and verify its performance.
So, before using it we should be aware that it will install the rest of our system (except GPU and SSD / HDD), including the motherboard chip. Therefore, we need to be aware of the temperature of all the remaining comp onents, because each test has different strengths and different operating modes, varying the load between certain components and others.
But how does it work? Well, first of all we will have to download the latest version available today, corresponding to 2,54, for example, from here. After that, we can separate it from any folder we want, as long as we don't separate its files into different directions, everything should be in the same source folder.
Software desperately wants to increase the CPU temperature to 22 degrees
The interface we will find will be:
Where we will have only three values we can touch. The first is «Output Outputs Output.log«, Where it basically allows us to have a list of program processes and procedures, they are very useful when our PC is restarted from time to time and we do not know when the time has been stable and why the trial is still ahead.
Next number Pressure Level, which, as its name implies, changes the rate of pressure that will be generated in the processor and the rest of the system.
The options that allow us are: custom, standard, High, very high and high. Many people believe that any of these standards guarantees fitness, but it is not true.
The only thing that really does matter is the high price, because it is the one that actually takes the available RAM high in the system and uses it under pressure, which at the same time requires a huge load on IMC and other buses connect with main memory.
When Maximum is selected as a set, we can indicate two other things to do: the number of passes we want to ensure (the larger number indicates that the CPU is more stable, because the failure options are greater) and the number of threads to load per program.
At first, we recommend you let it go 10 and for ALL, because over 10 we can guarantee maximum stability, in most cases we are perfect. But if this is not enough for you, we can show a double pass, for example, where we would say that the best is completely stable.
Now we have to hit the start button only, where the flame we see from the program itself will start moving and this will indicate that the system pressure is still active and that there is no cooling system.
When you are done with the pass number shown by us, this program will show us the final message indicating that everything has gone well, where we can close it and enjoy our escape with complete peace of mind.