Obviously, you should always check first what you have the latest version of printer drivers is included in the program, which you can find on the manufacturer's website. These drivers are sometimes not needed because Windows already sees the printer, but they almost always bring services to find a WiFi printer on the home network, give it the right port, etc.
Use the Windows 10 device to install the printer
Windows 10 has sprint problem solver it is integrated into an operating system, which will automatically detect printer communication problems and, unlike the standard Windows solution, in this case it works fine. To access it, go to Settings -> Devices -> Printers and Scanners. There, select your printer and click "Manage".
In the window that opens you will find the "Run Troubleshooting" option, which will automatically try to find out which printer you have.
If Windows doesn't get your own WiFi printer
If your problem is that Windows doesn't even find a printer, or uses a manufacturer's discovery tool, you may need to physically activate the printer's recovery mode. To do this, they usually have a button that will press for a few seconds until the light, which is usually blue, begins to flash.
When the light starts to burn the printer will already be the way to find it, so, we can go to Windows, Settings -> Devices -> Printers and Scanners and click the "Install Printer or Scanner" button. the system.
Eye over duplicate WiFi
A phase in the same problem is sometimes caused Frequency of WiFi. We often put multipliers so the WiFi signal reaches the whole home, but sometimes it can cause problems with WiFi printers. If for some reason the printer connects to the router's WiFi instead of the router, and it goes too far, the signal will get worse and often cause problems.
To solve this problem, just make sure the printer is connected to the right WiFi, which is the perfect access point.
If it gets a printer but it doesn't print
It is possible that contacting the publisher over WiFi is OK, but you cannot print. Many times the PC restart this will be fixed, but if you do not want to restart the working solution reset the print queue, because it is often blocked.
To do this, click on the start menu and type «Services» to access this section. In it, search for "Print queue", right-click and "Refresh."
If the printer does not work on your PC only
If you have multiple devices on your home network and the printer works fine on some, but not on your computer, then the indirect view tells us that the problem is on the PC, and the main problem is that you do not have network access enabled in the group.
To test it, access Windows 10 Control Panel and from there go to "Network and Sharing Center" and click on "Change advanced sharing settings".
Here, make sure you have the option "Activate network detection" and automatic computer deactivation.
Is the IP address assigned correctly?
Finally, you should check that the printer's IP is correctly configured. Briefly explain, if an IP address has four digits, your printer's IP and your PC must be the same as the first three.
For example, if your PC has IP 192.168.0.120, the printer should have IP 192.168.0.X (where X is any number between 1 and 254). If this is not the case, you must change the printer's IP address because, otherwise, you will not be able to use it from your PC.
Table of Contents